Stencils for Fabric Painting and Printing Choose your fabric very carefully. Make sure it does not have a stain resistant finish. If you can pre-wash your fabric, you will be sure that it is clean of any surface treatment that will keep the paint from adhering. Do not use fabric softener. For your first project, try to avoid any soft or floaty fabric that will be difficult to keep straight. 2 To paint with one of our stencils, you will need textile paints, specifically designed to be both washable and dry cleanable - our Jaquard textile paints are perfect. These paints will need to dry for 24 hours and be heat set.3 Lay out your paint colors on the palette. Do not thin the paint unless it is very, very thick - watery paint will bleed under your stencil edges. If you want pale colours, add white or use a very dry, transparent stenciling technique. |
| Test the colours and practice your painting on a piece of fabric. Make sure your brush is evenly covered with paint but do not load it. A loaded brush will spread paint under the edges of the stencil. Your goal is a nice, even dry brush technique with color that is smooth but not thick. Apply the paint with a gentle pounding motion, holding the brush straight up and down. Do not use a stroking motion. Again, this will keep the paint from seeping under the edges of the stencil. If your design has delicate bits that seem to be lifting as you paint, use an awl or chopstick OR even masking tape/ sellotape to hold them down as you paint. Paint all the colors in your design before lifting the stencil - once it has been moved, it is almost impossible to replace it exactly in the same spot. When you are finished, lift the stencil carefully. The paint should be dry to the touch, but let it dry for 24 hours. After 24 hours, iron your fabric on the back to set the colour, using the hottest possible setting.
|
|
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |