Threads and Patches  
 
[ Home ] [ Up ] [ Catalog ] [ Terms & Conds ] [ Search ] [ View Basket ] [ Checkout  ] [ Contact Us ] [ Login ]

Left tabRowena AllsoppRight tab


Beaded JewelleryBeaded Jewellery
Beaded Jewellery Set Requirements List

- 1 or 2 packets of 7 mm 'bugle' beads (in a colour of your choice)

- 1 or 2 packets of 'seed' beads (these can match or compliment the other beads)

- A reel of Nymo BeadingThread
- Beading needles
- Fine needle threader (if required)
- 2 sets of clasps
- 4 'split rings' and 4 'jump rings' to match clasp colour

- 2 small flat trays, to put beads in while working
- Beading mat

- Reading glasses if required
Diamonds and Squares QuiltDiamonds and Squares Quilt
Squares and Diamonds Quilt
(thanks to Katharine Guerrier)
Workshop Requirements List
This quilt can be made to any size.
" Scraps of fabric pre-cut into 3.5" squares
" At least 26 plainish Squares cut to 4"
" Pencil and ruler
" Sewing machine with a new needle fitted. General sewing foot and ¼" foot.
" Any thread that you want to use up.
" Rotary cutter, square ruler (Between 8.5 - 12.5 " is ideal) and cutting mat.
" General sewing kit, scissors, pins etc.
Easy Crazy QuiltEasy Crazy Quilt
Easy Crazy Quilt
Workshop Requirements List
" A selection of 10/12 fat quarters, or equivalent mix of fabrics. This works equally well as a colour themed or scrappy quilt. In this one I used black/white/grey fabrics, with red as an accent.
" 1-2 Packs of the pre-printed 'Crazy for You' foundation (Available from Threads and Patches). This is a fabric foundation which is not removed after sewing.
" Sewing machine with a new needle fitted and open (or clear) toed foot.
" Thread
" Rotary cutter, Square ruler (8.5" or larger) and cutting mat.
" General sewing kit, scissors, pins etc.
Easy Squares Bag RequirementsEasy Squares Bag Requirements
Easy Squares Bag
Workshop Requirements List
" 1 Metre Main Fabric for Handles and Lining
Plus 8 squares 6" x 6" Main Fabric (cut from 35cm x bolt width)
" 9 squares 6" x 6" Contrast Fabric (cut from 35cm x bolt width)
" Wadding 30" x 40"
" Sewing machine with a new needle fitted.
" Walking foot and ¼" foot
" 2 Bobbins
" Threads to match Main and Contrast fabrics
" Rotary cutter, ruler and cutting mat
" General sewing kit, scissors, pins etc.
" Safety Pins for basting
" Magnetic bag Clip


Fabric Landscapes Requirements List Fabric Landscapes Requirements List Ref: RAFL
Fabric Landscapes Requirements List
" Heat n' Bond Ultra
" Small 'cutting out' Scissors
" Pencil, Ruler & Eraser
" Black felt tip pen or similar (Must be able to see/copy the line drawn through a sheet of paper)
" A4 paper - several sheets
" Fat quarter thin, inexpensive white fabric or stiff muslin.
" Any fabric pieces and scraps which you think would fit into landscape scenery eg. Sky/ water effects, mottled greys, greens (batiks can be wonderful).
An array of batik scraps will be available for rummage, selection and purchase on the day. Each picture will be your own unique creation.

Before the class - search out as many mountain, lake type landscape pictures or photos that you like and bring them along. There is a good website at www.trekearth.com which has thousands of photos including some inspirational landscapes - beware it's addictive.

Click Here for Requirements PDF 





Falling Leaves Wall HangingFalling Leaves Wall Hanging


Falling Leaves Wallhanging
Requirements

I used Batik fabrics throughout, as I feel they give a more interesting and gentler effect.

0.5metre - For centre panel and wide border
LONG quarter (25cm off bolt) - For inner border & binding
0.5metre - Backing fabric
A variety of autumnal shades for leaves, avoid heavy patterns. (A varigated Batik can give several interesting combinations, so have a good rootle round the shop)
Cotton wadding (approx 35" x 20")

Heat and Bond (light) - medium pack
Thread to match background
Invisible thread for applique
Fine machine needles ( size 10)
Threads for embellishing leaves

General sewing kit and sewing machine
Rotary cutter, ruler and board
Getting to Grips with Foundation Piecing Getting to Grips with Foundation Piecing

Requirements List


" 4 co-ordinating Fat Quarters. A feature fabric for the centre of block and
1 light; 1medium; 1 dark.

" Fabric scissors, paper scissors
" Sewing machine that you are familiar with, with a new size 12 'sharps' needle fitted.
" Thread
" General sewing kit, pins, etc.
Playing with Twin NeedlePlaying with Twin Needle
Twin Needle Play - Faux Trapunto

This workshop introduces you to the uses and versatility of twin needles in your sewing machine. You will practice techniques and begin a panel for a cushion.

" 1 metre of washed and pressed calico

" A long ruler, cutting mat and rotary cutter.
" Sewing machine in good working order. Normal needles and at least 2 bobbins. Free motion (darning foot)
" 0.2mm and 0.4mm twin needles.
" A selection of threads, contrasting and neutral.
" A water soluble marker pen.
" General sewing kit.
" Pen and pencil
" Any cable stencils you may already have (not essential)
Rainbow Squares Quilt RequirementsRainbow Squares Quilt Requirements

A pack of 40 pre-cut 2.5" strips, eg a Jelly Roll or Balipop
Sewing machine with a new needle fitted and ¼" foot. Please bring machine manual.
Thread
Rotary cutter, long ruler and cutting mat.
General sewing kit, scissors, pins etc.
Lunch
Strippy BagStrippy Bag
Bring 7 strips - 2.5" x 42" co-ordinating strips
Fat quarter or similar fabric for lining
Fat quarter for bias binding
Low Loft wadding - approx 35" x 17"
Pack of Eyelets (which includes a hole punch)
1Metre chain or cord for handle

Rotary cutter mat & long ruler - please note Threads and Patches do not guarantee to have these available in the class for use, we do sell them, so please bring yours with you.
Sewing machine with which you are familiar, fitted with a new needle a ¼" foot and a walking foot
Matching thread and invisible thread
General sewing kit - needles , pins, scissors etc.
Scrappy Basket Weave QuiltScrappy Basket Weave Quilt
" Plain Foundation Fabric = old shirts/ blouses, pillow cases, sheets…. any uniformly thin fabric kicking about the house. Try to keep thickness and colour the same.
" Strips of cotton fabric any width, but must be at least 9" long. Lots of different colours or you can pick a toning theme…. Entirely your own choice.
" Rotary cutter, mat and ruler (square one at least 10.5")
" Sewing machine that you are familiar with, with a new needle; plus any feet supplied.
" Neutral thread
" General sewing kit, pins, scissors etc.
Scrappy DiamondsScrappy Diamonds
Scrappy Diamonds Quilt

Workshop Requirements List


Interfacing (medium weight) - 1 metre

Scrap fabrics - approx. 2 metres in total

Sashing material - 1 metre ( a plainish fabric works best)

General sewing kit - pins; scissors etc.

SEWING MACHINE with a new needle fitted. General sewing foot.

Any sewing thread that you want to use up.

Rotary cutter, long cutting ruler & board

Pencil and 12" Ruler

Square in a square Strip Quilt Requirements ListSquare in a square Strip Quilt Requirements List


" 40 (a pack/jelly roll) of 2.5" strips..... (makes single size bed quilt when border added)

" Rotary cutter, mat and ruler
" Sewing machine that you are familiar with, with a new needle; and accurate ¼" Foot
" Thread
" General sewing kit, pins, scissors etc.
Star Dance Quilt RequirementsStar Dance Quilt Requirements
Star Dance Quilt Requirements
54" x 45" finished (with border)
This is a very versatile pattern which works well as a scrap quilt or even in just 2 colours or contrasting tones.

" A selection of around 8 fat quarters, or large pieces of scrap fabric (12" x 4" minimum). A contrast of darks and lights works best.

" A 10.5" square ruler (or slightly larger). Cutting mat and rotary cutter.
(if you have a 6.5" square ruler bring that too.)

" Sewing machine in good working order, with new needle fitted and
¼" foot. Thread and basic sewing kit.
Thread Embellished CushionThread Embellished Cushion

Workshop Requirements List
" 1 Metre Main Fabric
" Pale Fabric 11" x 20"
" Pack or Skein of Mixed 'Oliver Twist' Threads
" Invisible Thread
" Thread to match both fabrics
" Sewing machine with a new needle fitted.
" 2 Bobbins
" ¼" foot, and clear or open-toed general foot
" Rotary cutter, long ruler and cutting mat
" General sewing kit, scissors, pins etc.


Take 8 Fat QuartersTake 8 Fat Quarters

45" x 60"
Workshop Requirements List
" 8 Scrummy Fat Quarters
" 80 cm x bolt width for Borders
" Sewing machine with a new needle fitted.
" ¼" foot
" Threads
" Rotary cutter, long ruler and cutting mat
" Marking pen/pencil
" General sewing kit, scissors, pins etc.

" 0.5 m for binding - Not needed on Day
" Wadding 50" x 65" - Not needed on Day
" Backing Fabric 50" x 65" - Not needed on Day


Cart Details
Items:
Value:

Sign Up for our Email Newsletter Here
Click here to sign up for newsletter and special offers